Stargate ship models by Eaglemoss

[dantini]

EM/MR model based on screen-used CG model or very good reconstruction
Screen-used CG model still exists or very good reconstruction possible
Important ships whose CG models have not been seen since the shows ended or that weren't CG to begin with

EM = Eaglemoss, MR = Master Replicas, IE = Image Engine, RM = Rainmaker, AT = Atmosphere

People with access to screen-used CG models:
- https://www.deviantart.com/spinobrea...tech-breakdown
- https://www.youtube.com/@Trekyardswe...query=Stargate
- https://www.jt-graphics.com/MK_BA.html (possibly)
- https://www.cgreactor.com/portfolio.html (official renders for EM)

CONFIRMED

#	Name	Release	Species	Appearances	Accuracy (to the best model) ( /4)	Notes
1	Daedalus	01.12.21	E	SGA	4	At least two CG models with minor differences. The EM model is based on #2 (yellow markings).
2	Goa'uld Mothership (Ha'tak)	15.02.22	G	SG1	4	The angular version with more and thicker dark stripes on the pyramid (IE? AT?) (overview). Predominant type in S. 3-10 and Continuum. I believe the EM model is based on a screen-used CG model, probably with modifications to the surface details.
3	Death Glider	15.05.22	G	SG1, SGU	1	Several different physical and CG models in SG1 S.1-6. In S.5 and early S.6 a CG version whose wings are strongly curved downwards is seen several times. The best model (IE?) was almost consistently used since 6x11, it was used by QMX and still exists. EM used this not very detailed fanmade model by Ed Giddings though.
4	F-302	28.07.23	E	SG1, SGA, SGU	3	Two CG models (comparison). #2 (built by Jose Perez, AT?) still exists and was used by both QMX and EM. I would have preferred the geometry of #1 (IE?).
5	Prometheus	15.01.24	E	SG1	3	EM seem to have used model #1 (low-detail, hyperdrive pods, IE?). #2 from 9x15 (more greebles, hangar pods, AT?) also still exists.
1a	George Hammond	01.06.24	E	SGU 1x01, 1x19	3	MR model says "- 02" instead of "- 05".
1b	Odyssey	01.06.24	E	SG1	4
6	Puddle Jumper		An	SG1, SGA	2	At least four CG models. IMO #1 (SGA S.1 hero, RM) is the only good one, it is very detailed and accurate to the S.1 physical jumper and still exists. This one (AT?) also still exists. MR used the one with the steep front (IE?), which is pretty much my least favorite one.
	Destiny		An	SGU		One CG model by Jose Perez was distributed to all VFX studios, EM have it.
	Beliskner		As	SG1 2x06, 3x03, 3x22, 4x01, 5x22		At least 3 models: Overview. EM have the best one from 5x22 (IE?).
	Wraith Dart		W	SGA		I slightly prefer the S.1 CG model, which still exists (RM?). Another was used for S.2-5 (AT?). Comparison.
	Destiny Shuttle		An	SGU		CG model still exists, as it was shown in new renders that Joseph Mallozzi posted in 2018. EM also seem to have it.

EARTH (E)

X-301	SG1 4x12	(IE?)
X-302	SG1 6x01-02	(IE?) Same geometry as F-302 model #1, slight camouflage pattern. Erroneously used in some scenes of SGA 5x20.
Apollo	SG1 Ark, SGA
Midway Space Station	SGA 3x11, 4x01, 4x17	(AT?)

GOA'ULD & LUCIAN ALLIANCE (G)

Al'kesh bomber	SG1	Only one CG model (?), which still exists (IE?).
Tel'tak cargo ship	SG1, SGU	Main CG model (IE?) still exists. There's also a version with curled wing tips (5x15, 5x17, 7x11-7x12, 8x01) (RM), and at least three less accurate models (4x14, 5x01, 5x16 during crash landing).
Lucian Alliance Mothership (Ha'tak)	SGU 1x01	The most recent CG Ha'tak type, only seen in SGU. Similar to early miniatures (rounded, different pattern of dark stripes on the pyramid), but modernized.
Apophis' flagship	SG1 4x14, 4x22, 5x01	There might be two different models of this ship, since the Ha'taks it appeared together with were different as well (rounded type in 4x14, angular type in 4x22, 5x01 (IE?)) - meaning those scenes were likely rendered by different studios that didn't share their assets.
Anubis' flagship	SG1 6x22, 7x01-02, 7x22, Continuum	(IE?)
Pyramid ship	Movie, SG1 2x05-06, 2x09, 3x01, 4x12	Miniatures in the movie, probably CGI in the show.
Goa'uld troop transport	SG1 5x15-16, 6x02, 6x22, SGU 1x01	(IE?) It seems tall and deformed in SG1 6x02.
Ra's Death Glider	Movie	Miniatures. Reference pictures exist.
Needle-threader	SG1 3x01
Hassara space station	SG1 5x15-16, 8x16
Apophis' Death Glider	SG1 1x01	Removed from Final Cut.
Anubis' escape ship	SG1 7x02
Osiris' archaic Tel'tak	SG1 4x13
Apophis' prototype ship	SG1 4x03	Never seen finished.

ANCIENTS (An)

Atlantis	SGA	There are two main families of CG models: The good one was built at RM for S.1 (hole in the center, terrace-like structures between some of the piers); a lower quality one was built by Jose Perez at AT for S.2 (triangular center, simplified). An AT-type model still exists, but it doesn't have the stardrive section. A RM-type model appears in a new render posted by Joseph Mallozzi in 2018, it may or may not have the stardrive. IMO Atlantis should ONLY be done based on (a complete version of) the RM-type model.
Aurora-class	SGA 2x09, 2x19-20, 3x01, 4x05, 4x10-11	At least a model with damage still exists.
Seed ship	SGU 2x03, 2x10-11
Ancient cruiser	SGA 4x02, 4x10
Ortus Mallum ship	Ark

WRAITH (W)

Shuttle	SGA 2x20, 3x01, 5x08, 5x10-11, 5x20	At least two CG models (different landing gear) (AT?).
Cruiser	SGA	Two CG models (S.1 RM?, S.2-5 AT?). The latter still exists, but I slightly prefer the former.
Hive	SGA, SG1 10x03	Two CG models (RM in SGA S. 1, 2x01, 3x01-02, 4x08 (RM); AT (?) in SGA S. 2-5, SG1 10x03). I don't have a clear preference. The ship was originally supposed to be asymmetric, that version (RM) is seen during the opening credits (behind Ronon).
Super-hive	SGA 5x20	(AT?)

ASGARD (As)

O'Neill	SG1 4x01, 5x22, 6x11-12, 8x01, 9x20	At least 3 CG models
Daniel Jackson	SG1 7x03, 8x01-02, 8x16
Pegasus Asgard ship	SGA 5x10, 5x11

REPLICATORS (R)

Cruiser	SG1 8x01-02, 8x11, 8x17
Spider ship	SG1 8x01-02, 8x16-17
Patrol ship	SG1 5x01, 6x12

OTHERS SG1

Gas cloud ship	7x13
Ori Mothership	SG1
Ori Fighter	10x01, 10x12, Ark
Bedrosian shuttle	3x19
Martin's ship	5x12
Martin's descent pod	4x11
Aschen Harvester	5x10
Terraforming ship	4x09
Eurondan fighter	4x02
Breeder bomber	4x02
Breeder drone	4x02
Sebrus	6x18, 7x08	Two CG models (first by RM)
Muirios' ship	7x08
Oran	7x08
Tritan	7x08
Stromos	7x06

OTHERS SGA

Travellers' ship	4x05, 4x11, 5x11
Poros	2x05
Ship	5x04
Fighter	5x04

OTHERS SGU

Nakai mothership	1x11-12, 1x16, 2x06, 2x11
Nakai fighter	1x03, 1x11-12, 1x15-16, 2x06
Drone control ship	2x11, 2x17, 2x19-20
Drone	2x10-11, 2x17, 2x19-20	More than one type?
Ursini ship	2x07, 2x10
Novus evacuation ship	2x18

NON-STARSHIPS

Milky Way gate	SG1, SGA, SGU	Very accurate fanmade model exists.
Pegasus gate	SGA	Accurate CG model in S1; model with only 8 chevrons appeared in S3. Very accurate fanmade model exists.
Destiny gate	SGU
MALP	SG1, SGA
UAV	SG1
AG-3 satellite	SG1 4x17
Horizon	SG1 3x20
Asuran gate satellite	SGA 3x20
Ancient defense satellite	SGA 1x12, 1x19
Ori satellite	SG1 9x15
Tel'tak escape pod	SG1 3x07, 3x12, 5x16-17, 6x03	CG and physical prop.
Ancient drone	SG1, SGA	CG and physical prop.

[dantini]

The first model is the BC-304 Daedalus!

https://shop.eaglemoss.com/eu/hero-c...daedalus-model

[Platschu]

I have mixed feelings about the Eaglemoss version. I believe it is a bit small, not deeply enough textured and the painting looks a bit off. But I guess they had to make a similar size then the previous ships from the other franchises.

Here is a more detailed, printable fan version :
https://www.thingiverse.com/thing:4671577

[Elite Anubis Guard]

I hadn't been impressed while looking at those pictures on my phone, but on my PC that actually looks a lot better! That's actually tempted me into buying this.

[McClance]

I just ordered mine. $60 including shipping, about as much as one of the larger Star Trek models.

[Elite Anubis Guard]

Is it as big as the XL Trek ones? Can't recall the dimensions.

[dantini]

It seems to be similar in size and price to the Star Trek Special / Discovery / Picard models. Not quite as big as an XL one.

[TheVoidDragon]

I have mixed feelings about the Eaglemoss version. I believe it is a bit small, not deeply enough textured and the painting looks a bit off. But I guess they had to make a similar size then the previous ships from the other franchises.

Here is a more detailed, printable fan version :
https://www.thingiverse.com/thing:4671577

The Eaglemoss version will presumably have been based on the digital files used for the show, though. The painting could do with some improvement (a wash to bring out the detail, at least) but I don't see how its missing anything - that printed version is heavily exaggerated with its details.

[Platschu]

Probably I will order it anyway. I am sorry, if I sounded too negative. I am just a bit maximalist as I want the best quality-value ratio for the whole fandom.

I hope the XL version is kept for Atlantis as it would look cool to have a larger cityship next to the regular ones.

I believe Eaglemoss should consider to make the 3 gate types as well.

[dantini]

It sounds promising they have borrowed and updated the vfx models

We don't really know how many models they could track down though. The announcement said they got in touch with "the production team" and have "the VFX models", but I doubt that they have all the models and made contact with all the VFX companies that ever worked on SG (and often didn't share their models with each other).

MGM probably don't keep a central archive of CG assets. Even CBS (Star Trek) apparently doesn't, so Eaglemoss frequently had to get them from individuals who used to work for the CG companies and took them home with them.

It's likely that Eaglemoss at least have everything this guy could get his hands on as well: Death Glider, Tel'tak, Al'kesh, F-302, Wraith Dart, Wraith Cruiser, Daedalus, Puddle Jumper, Prometheus, Atlantis (without the stardrive section).

A lot of important starship models haven't been seen at all since the shows ended: Ha'taks, Apophis' and Anubis' flagships, the Asgard ships, Destiny, Aurora class, Ori mothership, Wraith hive, Wraith super-hive...

[dantini]

The next model is a Ha'tak (late SG1 / Continuum version):



Edit: More pictures here.

Issue 3 will be the Death Glider.

[Platschu]

Thanks for sharing the link! This Ha'tak looks so amazing and detailed. Wow. I am really impressed.

The X304 also looks much better on these closeups.

[Falcon Horus]

My first reaction: "Oh, that looks kinda cute."

[Elite Anubis Guard]

Up close the Daedalus and the Ha'tak looks genuinely good! Think I shall bite the bullet and get these. Just hope it's not "prototype pretty" on display here and they're all that good.

[Platschu]

I believe the resolution of the tiny details look much better what you could achieve with any 3d prints at home. I hope you are right about the quality as I was always hesitating because of the price. But since I haven't had a proper holiday thanks to the pandemic, I believe I deserve this gift after so many years.

By the way the Ha'tak is one of the most unique looking scifi ship. Just the art department of S1 sacrificed the rectangle base concept from the movie for the triangle shaped design. As this ship was supposed to land on pyramids.