I keep mine in the shed.. But I have half a Kino on my shelf 
-
-
I took the first fibreglass cast of the kino out of the mould today.. And it's slightly smaller than the original
The resin must have shrunk..
I'll have to try it again with different resin to see if that makes a difference..Comment
-
PH, thought you might like to see this. It's a shelf of some of my props
On this shelf I have: atlantis files, weirs office books, wraith hard drive, personal shield generator, Ronon's knife and one of your stunners. All screen used except for the shield and stunner.
2015-03-03 00.00.44.jpgComment
-
I have a shelf a bit like that.. but mine is full of half stunners full of air bubbles.. and parts of a Ronon Sword.. A box with a foam Prior staff that I'll finish one day, and my Goa'uld healing device I have about 8 or 9 crystals for it but most of them need polishing 
...I have replicator blocks just randomly scattered everywhere.. I keep finding them
Comment
-
Thought you'd know by now that you only need a few replicator blocks.....and............ !!Originally posted by Pharaoh Hamenthotep View Post
I have a shelf a bit like that.. but mine is full of half stunners full of air bubbles.. and parts of a Ronon Sword.. A box with a foam Prior staff that I'll finish one day, and my Goa'uld healing device I have about 8 or 9 crystals for it but most of them need polishing
...I have replicator blocks just randomly scattered everywhere.. I keep finding them
Comment
-
Well hey, I am going to have someone make me...and I know it sounds crazy....500 (yes five hundred) replicator blocksOriginally posted by Krisz View PostThought you'd know by now that you only need a few replicator blocks.....and............ !!
But don't worry, the same person is making me an ARG
Comment
-
Why do you need 500?
....Are you starting a replicator army?Comment
-
Haha! No its for a display. I plan on scattering them everywhere, and displaying my ARG, replicator pistol and replicator art work. I'm also looking for a replicator bug, because it's too hard for me to make...Originally posted by Pharaoh Hamenthotep View PostWhy do you need 500?
....Are you starting a replicator army?Comment
-
-
this guy on ebay is now offering an array of stargate ship models from what look like mod games
http://www.ebay.com.au/usr/ru-kirja?...53.m2763.l2754Comment
-
I'm a happy repeat buyer! They are not as refined in finish as the industrial-scale printers are at Shapeways and show some plastic joining lines, but are still good. The seller is also polite, ships quickly, and packages items well.Originally posted by Stubba2 View PostComment
-
I agree with you WT I also have bought two models from this guy. They are fine if you just want your own ship model, however if you are a serious fan modeler they are a good prototype print to sculpt and recast for a more professional finish. They are 3d printed and raw the models are from a db Mod game I posted about a couple of years ago that did not reach completion, and the game team released the artwork stl files for fan use, (printing and selling them actually breaches the terms and conditions that were agreed to to get them but hey his call) Considering the seller has literally put no effort into designing these free stl files and has just printed them they are a bit pricey for what they are. The cost of these files are free if you follow my link to the "stargate PC games" in my footer and go to the dB Mod site, 3d editing and printing software is free under trial in most cases. A 3d printer the quality that these are produced in is around A$300 at the moment. The plastic filament is around A$30 a roll, which will make about ten models of this dimension. If you go to entry 22 of this post "the Models and blueprints" you will also find one of my prints that he is now selling selling of the gate glider that I posted updates on back in 2012, it will show you some of the process photos of what is required to get these models up to spec. This model cost me A$10 to print and around 60 hours of work to sculpt and paint.Originally posted by WraithTech View Post
So for the cost of three models you could have the ability to make 10 of your own at his asking prices; however, he is open to negotiation and offers on the models especially if you are buying more than 1. I have been able to get mine down in price but i did have to do a lot of rework and clean up on the models to reach a standard i was happy to put in my cabinet.
I fully agree with the polite and prompt service this guy offers and do not worry about them being from russia, they turned up promptly and my bank account details were not flouted.
Last edited by Stubba2; 05 April 2016, 05:30 PM.Comment
-
Stargate tagged items from Shapeways. There is a Replicator bug someone previously asked for (also one on the Russian eBayer's shop previously mentioned):
http://www.shapeways.com/marketplace/?tag=stargate
Got my eye on this replica Teyla necklace, offered in stainless, just like the production artwork sketch calls for:
http://www.shapeways.com/product/Y87...ionId=55892393
Free shipping promo code for July:
https://www.retailmenot.com/view/shapeways.comLast edited by WraithTech; 01 July 2016, 06:50 PM.Comment
-
-
Some Stargate finds on etsy (control crystals, city models, uniform patches, gate and dhd model pieces and jewelry and more):
https://www.etsy.com/search?q=starga...ery&ship_to=USComment
"Check out or post Models, toys and blueprints "
Comment