Results 1 to 15 of 15
  1. #1

    Default Interactive, functioning, 3D printed Stargate with wormhole effect.

    Hi everyone.
    I am currently working on a 3D printed Stargate project, with wormhole effect, moving parts and a working DHD. If you want to check it out you can find it on my page here: https://stargate.datarommet.com
    Hope you like it.

  2. #2
    Air Force Chief of Staff Falcon Horus's Avatar
    Member Since
    May 2004
    Location
    Atlantis
    Posts
    35,401

    Default Re: Interactive, functioning, 3D printed Stargate with wormhole effect.

    Looks neat.
    Heightmeyer's Lemming -- still the coolest Lemming of the forum
    Proper Stargate Rewatch -- season 9 of SG-1
    First time watching Star Trek: The Adventures of Captain Kirk and his Trusted Sidekick, Mr. Spock

  3. #3
    Major
    Member Since
    Jun 2010
    Location
    Mapleleaf
    Posts
    2,076

    Default Re: Interactive, functioning, 3D printed Stargate with wormhole effect.

    What's the scale? I couldn't watch the video, and didn't see anything in the image to tell me--although compared to the gate, it appears the DHD is enormous.

    Seaboe
    If you're going to allow yourself to be offended by a cat, you might as well just pack it in -- Steven Brust

  4. #4

    Default Re: Interactive, functioning, 3D printed Stargate with wormhole effect.

    The Stargate itself is about 39 cm in diameter.
    The DHD dial pad is 10 cm in diameter.
    I took an image with a bottle 0.5 litre bottle of coca cola in the mix to easier see the scale.
    https://stargate.datarommet.com/wp-c...ale-scaled.jpg

  5. #5
    Air Force Chief of Staff Falcon Horus's Avatar
    Member Since
    May 2004
    Location
    Atlantis
    Posts
    35,401

    Default Re: Interactive, functioning, 3D printed Stargate with wormhole effect.

    Quote Originally Posted by Kristian Tysse View Post
    The Stargate itself is about 39 cm in diameter.
    The DHD dial pad is 10 cm in diameter.
    That's actually bigger than any scale model I've seen.

    I have seen replica build DHD's and stargate's (by which I mean lifesize replica's) but scale models always are smaller than that.

    * The replica build by the French and the Belgians -- 2 separate groups. The one by the French is cooler, but don't tell my builder-colleagues I said that. Ours is cool too.
    Heightmeyer's Lemming -- still the coolest Lemming of the forum
    Proper Stargate Rewatch -- season 9 of SG-1
    First time watching Star Trek: The Adventures of Captain Kirk and his Trusted Sidekick, Mr. Spock

  6. #6

    Default Re: Interactive, functioning, 3D printed Stargate with wormhole effect.

    For the 3D printed models my guess would be that people make them smaller to fit the print volume of the 3D printer. I am printing my model in several pieces and putting them together. Also i found it necessary to make it at least that size to be able to fit all the wires, buttons, motors and lights on it. Currently I am trying to figure out how to add lights to the moving part of the chevron. (That "V" thingy). It's going to be a tight fit.

    I like those life size Stargates. They are really amazing!

  7. #7
    Air Force Chief of Staff Falcon Horus's Avatar
    Member Since
    May 2004
    Location
    Atlantis
    Posts
    35,401

    Default Re: Interactive, functioning, 3D printed Stargate with wormhole effect.

    I imagine, you're going to have your work cut out to make it fit, but from what I've seen so far, I think you'll do just fine.

    Just make sure to keep sharing images.
    Heightmeyer's Lemming -- still the coolest Lemming of the forum
    Proper Stargate Rewatch -- season 9 of SG-1
    First time watching Star Trek: The Adventures of Captain Kirk and his Trusted Sidekick, Mr. Spock

  8. #8

    Default Re: Interactive, functioning, 3D printed Stargate with wormhole effect.

    I have finally made the DHD lights work lights when the buttons are pressed. I posted a short video of it on the site if anyone wants to see it: https://stargate.datarommet.com/2020/04/22/dhd-lights/

    https://stargate.datarommet.com/wp-c...hts-scaled.jpg

    The lights in the "Chevron V" is still a work in progress.

  9. #9

    Default Re: Interactive, functioning, 3D printed Stargate with wormhole effect.

    A new update is available with new chevron lights. It was a tight fit, but it worked out in the end:

    https://stargate.datarommet.com/2020...-and-rewiring/

  10. #10
    Air Force Chief of Staff Falcon Horus's Avatar
    Member Since
    May 2004
    Location
    Atlantis
    Posts
    35,401

    Default Re: Interactive, functioning, 3D printed Stargate with wormhole effect.



    Wicked!
    Heightmeyer's Lemming -- still the coolest Lemming of the forum
    Proper Stargate Rewatch -- season 9 of SG-1
    First time watching Star Trek: The Adventures of Captain Kirk and his Trusted Sidekick, Mr. Spock

  11. #11
    Major
    Member Since
    Jun 2010
    Location
    Mapleleaf
    Posts
    2,076

    Default Re: Interactive, functioning, 3D printed Stargate with wormhole effect.

    Congratulations. It looks terrific.

    Seaboe
    If you're going to allow yourself to be offended by a cat, you might as well just pack it in -- Steven Brust

  12. #12

    Default Re: Interactive, functioning, 3D printed Stargate with wormhole effect.

    Hi everyone!
    My 3D printed Stargate project is now finally finished.
    Check it out at https://stargate.datarommet.com
    Hope you like it.
    finished_stargate_active.jpg

  13. #13
    Air Force Chief of Staff Falcon Horus's Avatar
    Member Since
    May 2004
    Location
    Atlantis
    Posts
    35,401

    Default Re: Interactive, functioning, 3D printed Stargate with wormhole effect.

    Wow, that looks amazing...
    Heightmeyer's Lemming -- still the coolest Lemming of the forum
    Proper Stargate Rewatch -- season 9 of SG-1
    First time watching Star Trek: The Adventures of Captain Kirk and his Trusted Sidekick, Mr. Spock

  14. #14

    Default Re: Interactive, functioning, 3D printed Stargate with wormhole effect.

    That's incredible! The detail you put into it is insane!

  15. #15
    Airman anaesthetic's Avatar
    Member Since
    Nov 2012
    Location
    Wisconsin
    Posts
    40

    Default Re: Interactive, functioning, 3D printed Stargate with wormhole effect.

    I've seen a couple, but the lights look awesome!

Similar Threads

  1. SGU's Wormhole Effect
    By Pharaoh Atem in forum Stargate Universe
    Replies: 49
    Last Post: May 10th, 2010, 11:15 AM
  2. Wormhole effect in Atlantis
    By Sierra Golf 1 in forum Stargate Atlantis
    Replies: 4
    Last Post: July 19th, 2009, 01:25 AM
  3. Wormhole Effect
    By Crazedwraith in forum Stargate SG-1
    Replies: 12
    Last Post: December 12th, 2008, 06:57 AM
  4. Wormhole Effect
    By SaberBlade in forum General Stargate Discussion
    Replies: 9
    Last Post: December 6th, 2008, 03:02 PM
  5. Wormhole Effect?
    By Elite Anubis Guard in forum Stargate SG-1
    Replies: 24
    Last Post: October 24th, 2005, 06:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •