Page 51 of 51 FirstFirst ... 4148495051
Results 1,001 to 1,018 of 1018
  1. #1001
    First Lieutenant Thunderbird 2's Avatar
    Member Since
    May 2006
    Location
    East of Cardiff, Wales.
    Posts
    726

    Default Re: A Thread For Custom Figures

    Quote Originally Posted by Stubba2 View Post
    Here is a look at two ongoing projects I have at the moment. They a 7 inch customs of a Horus Guard helmet and Apophis. The Horus Helmet is in prototype phase at the moment with tweeks being done before I mould and cast in resin but it is coming along. The Apophis custom is probably 1/2 done. I have an open serpant guard helmet mould completed but not yet cast and I am on take two to make the eyes and hand device glow LEDs was clumbsy so I am now using fibre optics, but that is time consuming. Once they are sorted I have some minor skulpting and painting to do and customising the figure stargate stand for that figure to glow with blue LEDs in conjunction with the figure, I hope to put this on a motion sensor circuit so it comes on when you enter the room. For TB2 I will send you the Horus prototype to play with while I sort out the final cast moulds.
    Attachment 37872 horus
    Attachment 37875 horus
    Attachment 37874 Apophis
    Hi Stubba,

    once again Thank You very much, and the Horus head looks great, even at prototype stage! I'm curious to see your illuminating efforts on Apophis too. I can see I need to be keeping a closer eye on the thread!
    Converting a human body into energy and sending it millions of light years through a wormhole. Bloody insanity!
    Come on, how often do you get the chance to go to an alien planet?

    I was a'ready on an alien planet!

    - Poisoning the Well, Atlantis Season 1.

  2. #1002
    Probie highwayman57's Avatar
    Member Since
    Jun 2009
    Location
    Warrenton, VA
    Posts
    18

    Default Re: A Thread For Custom Figures

    Another eBay score for me-- I nabbed a Diamond Select 12 inch Daniel Jackson for only $19.99 plus shipping. I bought it primarily for the accessories!
    David

  3. #1003
    First Lieutenant Stubba2's Avatar
    Member Since
    Jun 2012
    Location
    Australia, 3rd rock from the sun
    Posts
    786

    Default Re: A Thread For Custom Figures

    Here is a link to some good SG customs and pops.
    http://www.jedidefender.com/yabbse/i...?topic=21918.0

  4. #1004
    First Lieutenant Stubba2's Avatar
    Member Since
    Jun 2012
    Location
    Australia, 3rd rock from the sun
    Posts
    786

    Default Re: A Thread For Custom Figures

    For TB2 I know you are working on one of these thought you might like to see this one.
    Attachment 37955

  5. #1005
    Chief Master Sergeant spratty's Avatar
    Member Since
    Aug 2012
    Location
    Adelaide, Australia
    Posts
    148

    Default Re: A Thread For Custom Figures

    The custom helmet is awesome!

  6. #1006
    First Lieutenant Stubba2's Avatar
    Member Since
    Jun 2012
    Location
    Australia, 3rd rock from the sun
    Posts
    786

    Default Re: A Thread For Custom Figures

    Quote Originally Posted by spratty View Post
    The custom helmet is awesome!
    R U reffering to the horus guard? I am also doing an anubis guard (jackal)

  7. #1007
    Probie
    Member Since
    Sep 2016
    Posts
    2

    Default Re: A Thread For Custom Figures

    Hi !

    First, I would like to thank you guys for posting your amazing customs ! Unfortunately, some post are very old and the pictures are not available anymore. I wish I could see everything that was done.

    This thread inspired me, and made me want to try it.
    My first customs were small things, nothing eccentric : a zat holder, the airforce patch, I repainted the staff weapon :



    I also did a "black ops Sam".

    Someone talked about the hazmat suit (no photo available though). I loooove this outfit, so I had to try.
    Also, I prefer Jack (and RDA) with short hair, so I gave him an haircut. Not as good as I wish, I will try to do better next time ...



    I need an advice : how do you protect your figure once it is painted ? I tried to use varnish, but it is too shiny ... even with matt varnish ... Shiny is ok for the hazmat suit, but I tried to repaint a figure in blue (to make a "garrisson"), and the shiny aspect ruined it ...

  8. #1008
    First Lieutenant Stubba2's Avatar
    Member Since
    Jun 2012
    Location
    Australia, 3rd rock from the sun
    Posts
    786

    Default Re: A Thread For Custom Figures

    r u using enamel or acrylic paints? to tone down the blue dry brush with white. will advise sealer when u reply

    16-2.jpg
    Last edited by Stubba2; October 18th, 2017 at 03:09 AM.

  9. #1009
    Probie
    Member Since
    Sep 2016
    Posts
    2

    Default Re: A Thread For Custom Figures

    Quote Originally Posted by Stubba2 View Post
    r u using enamel or acrylic paints? to tone down the blue dry brush with white. will advise sealer when u reply

    16-2.jpg
    Hi,
    Someone advised me to use a varnish from Testor and it works perfectly. However, I have not tried to "restored" my Garrisson figure yet. I think I will need to remove the varnish and paint, to paint it all over again ...

    I created a facebook page the summer with pictures of a small fraction of my figures.

    Sorry I didn't respond sooner. I don't really have the time to work on my figures right now (but I have a few customs in mind ) ... Other projects too ... So I will come back later, eventually

  10. #1010
    First Lieutenant Stubba2's Avatar
    Member Since
    Jun 2012
    Location
    Australia, 3rd rock from the sun
    Posts
    786

    Default Re: A Thread For Custom Figures

    just checked out your fb nice job we have actually chatted not too long ago and you inspired me to do the hazmat suit on the BSG figure

  11. #1011
    First Lieutenant Stubba2's Avatar
    Member Since
    Jun 2012
    Location
    Australia, 3rd rock from the sun
    Posts
    786

    Default Re: A Thread For Custom Figures

    horus.jpghore.jpgVlcsnap-2014-05-07-22h15m22s177.jpg

    (1/12 scale) Lvl28 custom Horus with duel head options
    https://www.facebook.com/lvl28toys/
    Last edited by Stubba2; November 27th, 2018 at 08:17 PM.

  12. #1012
    First Lieutenant Stubba2's Avatar
    Member Since
    Jun 2012
    Location
    Australia, 3rd rock from the sun
    Posts
    786

    Default Re: A Thread For Custom Figures

    apo.jpgapoph.jpgapophis.jpg

    (1/12 scale) LVL28 custom Apophis ceremonial garb with ref shot
    https://www.facebook.com/lvl28toys/
    Last edited by Stubba2; November 27th, 2018 at 02:44 PM.

  13. #1013
    First Lieutenant Stubba2's Avatar
    Member Since
    Jun 2012
    Location
    Australia, 3rd rock from the sun
    Posts
    786

    Default Re: A Thread For Custom Figures

    DSC_0264.jpgimages (2).jpg

    (1/12 scale) scratch work in progress with ref shots character pose is from the destruction of the hell planet scenes
    Attached Images Attached Images
    Last edited by Stubba2; November 27th, 2018 at 08:19 PM.

  14. #1014
    First Lieutenant Stubba2's Avatar
    Member Since
    Jun 2012
    Location
    Australia, 3rd rock from the sun
    Posts
    786

    Default Re: A Thread For Custom Figures

    heads02.jpgbody.jpg

    (1/12 scale) custom scratch build head and body Micheal wip body by LVL 28 customs
    https://www.facebook.com/lvl28toys/
    Last edited by Stubba2; November 27th, 2018 at 08:11 PM.

  15. #1015
    First Lieutenant Stubba2's Avatar
    Member Since
    Jun 2012
    Location
    Australia, 3rd rock from the sun
    Posts
    786

    Default Re: A Thread For Custom Figures

    vy;n.jpg40198877_2649883338570229_2914837181006610432_n.jpg

    hathor and the SG1 team custom pops from lvl28
    i luv the mini staff weapon
    https://www.facebook.com/lvl28toys/
    Last edited by Stubba2; December 2nd, 2018 at 10:57 AM.

  16. #1016
    First Lieutenant Stubba2's Avatar
    Member Since
    Jun 2012
    Location
    Australia, 3rd rock from the sun
    Posts
    786

    Default Re: A Thread For Custom Figures

    level 28 custom pops DvSMgvZU8AAZd0u.jpg

  17. #1017
    First Lieutenant Stubba2's Avatar
    Member Since
    Jun 2012
    Location
    Australia, 3rd rock from the sun
    Posts
    786

    Default Re: A Thread For Custom Figures

    Here is a level 28 custom Carson Beckett 1/12 scale (Diamond Select size)
    It is currently up on Ebay for sale if you must have.
    https://www.ebay.com/itm/163466666729?ul_noapp=true
    s-l1600 (1).jpg

  18. #1018
    First Lieutenant Stubba2's Avatar
    Member Since
    Jun 2012
    Location
    Australia, 3rd rock from the sun
    Posts
    786

    Default Re: A Thread For Custom Figures


Tags for this Thread

Similar Threads

  1. Custom Titles
    By The Signal in forum Off-Topic Chatter
    Replies: 15
    Last Post: December 13th, 2010, 03:47 PM
  2. rep custom?
    By lunchbox in forum Off-Topic Chatter
    Replies: 3
    Last Post: December 24th, 2006, 11:20 AM
  3. Custom Avatar
    By Eoin in forum Forum Announcements and Help
    Replies: 132
    Last Post: February 27th, 2006, 01:16 PM
  4. Custom Images
    By Elite Anubis Guard in forum Stargate Fandom
    Replies: 0
    Last Post: November 20th, 2005, 08:44 AM
  5. Am I The First ? Re: Local Custom
    By KarenEames in forum SG-1 News (Archive)
    Replies: 4
    Last Post: July 25th, 2005, 10:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •