Modeling Challenge Thread

[Alx]

should store ur model file sand render files in seperate folders

i do hence the issue in finding the folder that contained the model but i found it eventually.

could we not have an extension?

well a short one would be in order as Dr Lee is the only participant so far..

[boberth2o]

He sorry about the delay I was on a skiing excursion this weekend. It was very fun and don't worry Ill have to submissions out to the judges later today.

[boberth2o]

He sorry about the delay I was on a skiing excursion this weekend. It was very fun and don't worry Ill have to submissions out to the judges later today.

It won't let me edit this post so what I meant was "hey" instead of "he"

[Alx]

who can blame ya we have snow up the "whazoo" here and im itching to strap myslef on the board and go for a ride

and hope the judging goes better this time around.. still no word on the jaffa challenge?

[boberth2o]

The Thirteenth Challenge

Part I

For the Thirteenth Challenge Part I you will be creating a New Winner Signature
for the challenge winners. The dimensions will have to be 95 pixels in height and 750 pixels in width. Those are the only restricitions for this part so cheers and Happy Photoshoping!

Part II

For the Thirteenth Challenge Part II you will be creating Gunship. There are the normal restrictions and if doesn't have to be for a specific race. But keep it reasonable because you want to be able to win it in the end. All submissions are due on March, 25 2010 at Midnight GMT. If you want to do something and think it's against the rules, go check them out they are on the first post. Cheers and Happy Modeling!

You can do either or, you don't have to submit both. Same submission date for both.

[Dr Lee]

New Winners Sig? That'll be interesting....

[Alx]

The Thirteenth Challenge

Part I

Part one will be encompass making a New Winner Signature
for the challenge winners. The dimensions will have to be 95 pixels in height and 750 pixels in width. Those are the only restricitions for this part so cheers and happy photoshoping!

Part II

Part II is undisclosed until I get off of a phone and on to a computer.

Due dates are TBA

intresting.

[boberth2o]

Sorry with the delay and everything but college and the winter have been getting the best of me. I'll try to stay on time but if i cant in the future someone might want to take over for me. The Thirteenth Challenge is updated and had due dates, here are The Eleventh Challenge Results.

The Eleventh Challenge Results

Spoiler:

Committee Member I

Spoiler:

-Member Name- Lord Groovy

-Ship Name the Asra'tak or Sparrow's ship

-ship Specs 1

-ship Use 3

-Real Life Stargate Tech (Lifted) 3

-Presentation 2

-Originality 2

-Style 3

-Other (you can specify a feature that they did well on or didn't at all)

Total = 14

-------------------------

-Member Name- Pharaoh Hamenthotep

-Ship Name Fighter Transport ship - Kel'Tak

-ship Specs 3

-ship Use 3

-Real Life Stargate Tech (Lifted) 3

-Presentation 2

-Originality 3

-Style 3

-Other (you can specify a feature that they did well on or didn't at all)

Total = 17

----------------

-Member Name- thekillman

-Ship Name Ash'tak Class

-ship Specs 3

-ship Use 3

-Real Life Stargate Tech (Lifted) 3

-Presentation 2

-Originality 2

-Style 2

-Other (you can specify a feature that they did well on or didn't at all)

Total = 14

Committee Member II

Spoiler:

-Member Name - lord groovy
-Ship Name - Asra'tak
-Ship Specs – 1 The specs felt lacking, like they were a last minute job.
-Ship Use - 2
-Real Life Stargate Tech – 1 The write up does not seem to really touch much into the tech used.
-Presentation - 2
-Originality - 2
-Style - 3
-Other – 2 It takes the original goa’uld ship concept and presents it in a familiar but fresh way.

-Total – 13

-Member Name - Pharaoh Hamenthotep
-Ship Name - Kel'Tak
-Ship Specs – 3
-Ship Use - 2
-Real Life Stargate Tech - 3
-Presentation - 3
-Originality - 2
-Style - 2
-Other – 1 Despite being a well made ship the design feels a bit generic (could fit in any sci-fi show) and the path from goa’uld made ships to new jaffa ships does not feel clear.

-Total – 16

Member Name - thekillman
-Ship Name - Ash'tak
-Ship Specs – 2 Very informative write up but it seemed to focus more on history than the ship itself. Personally I would have added an extra paragraph or two about the ship.
-Ship Use - 3
-Real Life Stargate Tech - 3
-Presentation - 2
-Originality - 2
-Style – 1 The design comes off a bit bland.
-Other – 1.5 The addition of the background history was a nice touch but it did over shadow the ship.

-Total – 14.5

Committee Member III

Spoiler:

-Member Name: Lord Groovy
-Base Name: Asra'tak or Sparrow's ship

-Base Specs: 2
-Base Use: 3
-Real Life Stargate Tech (Lifted): unsure...2
-Presentation:3
-Originality:3
-Style:3
-Other (you can specify a feature that they did well on or didn't at all)

A great design showing progression and evolution, fits the brief perfectly!!!
Extra points awarded: 3

Total = 19
---------------------------------------


-Member Name: Pharaoh Hamenthotep
-Base Name: Kel'Tak

-Base Specs: 3
-Base Use: 2
-Real Life Stargate Tech (Lifted): 3
-Presentation: 3
-Originality: 3
-Style: 2
-Other (you can specify a feature that they did well on or didn't at all)

Total = 16
----------------------------------------


-Member Name: thekillman
-Base Name: Ash'tak Class

-Base Specs: 3
-Base Use: 3
-Real Life Stargate Tech (Lifted): 3
-Presentation:2
-Originality:2
-Style:2
-Other (you can specify a feature that they did well on or didn't at all)
Very detailed specs and history, disliked the inclusion of Asgard beaming tech on a Jaffa vessel.

Total = 15
----------------------------------------

Committee Member IV

Spoiler:

-Member Name: Lord Groovy
-Base Name -
-Base Specs 2
-Base Use 2
-Real Life Stargate Tech 3
-Presentation 3
-Originality 3
-Style 3
-Other (you can specify a feature that they did well on or didn't at all)

very very nice original concept clean lines awesome greebles.

Total = 16

-Member Name: PH
-Base Name -
-Base Specs 1
-Base Use 2
-Real Life Stargate Tech 1
-Presentation 1
-Originality 3
-Style 3
-Other (you can specify a feature that they did well on or didn't at all)

very original! as usual. i also enjoyed the animations!
Total: 11

-Member Name: Killman
-Base Name -
-Base Specs 2
-Base Use 2
-Real Life Stargate Tech 3
-Presentation 2
-Originality 2
-Style 1
-Other (you can specify a feature that they did well on or didn't at all)
very nice attempt at a jaffa ship and the animations was a nice touch!

total: 12

Committee Member V

Spoiler:

-Member Name - lord groovy
-Ship Name - Asra'tak
-Ship Specs – 2
-Ship Use - 2
-Real Life Stargate Tech – 2
-Presentation - 2
-Originality - 3
-Style - 3
-Other – 2

-Total – 16

-Member Name - Pharaoh Hamenthotep
-Ship Name - Kel'Tak
-Ship Specs – 3
-Ship Use - 2
-Real Life Stargate Tech - 3
-Presentation - 3
-Originality - 2
-Style - 2
-Other – 1

-Total – 16

Member Name - thekillman
-Ship Name - Ash'tak
-Ship Specs – 2
-Ship Use - 3
-Real Life Stargate Tech - 3
-Presentation - 2
-Originality - 2
-Style – 1
-Other – 2

-Total – 15

The Winner

Spoiler:

Lord Groovy!

Spoiler:

[lord groovy]

I don't know what to say... Well Thanks everyone and let's keep up the good work !

[Alx]

congrats grovy well deserved imo

[Dr Lee]

Well done Groovy!!!

[thekillman]

*confused * what was your model?

[Merlin1701]

Delphin Class Specifications

Spoiler:

Delphin Class Specifications

Tauri Deep Sea Submarine
Delphin Class
Technology Base: Asgard / Tauri / Ancient

Dimensions
Length: 80m
Width: 24m
Height: 12m

Hull
Naquadah/ Trinium alloy.

Engines:
Sub-light ion Drive
Manoeuvring Thrusters

Armaments:
1 offensive forward firing energy cannon
10 Naquadah enhanced torpedoes


Shields:
Tauri shield system – Created using Asgard and Lantean technology, allowing the submarine to explore further depths of bodies of water by reinforcing the hull, this method was first used by puddle jumpers.

Additional Technology:
Chameleon Armour – used on the Parsonii class stealth ship applied to the Delphin class submarine
Subspace Communication System
Asgard Transportation Technology
Asgard Sensor array
Inertial Dampers

Power:
Mark 5 Naquadah generators

Delphin Class Information

Spoiler:

As the knowledge of the Stargate program, Atlantis and Earth’s expanding fleet of interstellar ships was entrusted to more and more nations of Earth. The next stage in the development of Home World Security was to make it an international force, each nation put forward sections of their military to form a new force to defend Earth and its interests.

After past events of the Stargate program and Atlantis Navy factions in Home world Security requested funding for a new project, a submarine capable of being deployed from a ship to a large body of water. With Asgard sensors and advanced shields the sub can explore deeper than any other before. The ship is relatively small to keep the costs of the project lower, build more for the budget and maximise ships power use for defence and sensors.

The design favoured was named the Delphin class selected as the proposed design favoured speed and defence over offence. As internal space is at a premium on any ship especially a submarine weapon systems were reduced down to a single forward firing energy cannon and ten naquadah torpedoes; favouring more naquadah generators and the stealth technology from the Parsonii class named chameleon armour.

The main problem with cloaking technology is the power requirements; the chameleon armour is different than a cloak in that its hull is composed of a material capable of bending light around the object when a small electrical current is passed through it. Another addition is its dark tone of the composite, hiding the ship in dark environments when the armour is not in use.

Delphin Class Images

Spoiler:

[Alx]

*confused * what was your model?

http://forum.gateworld.net/showthrea...1#post11099735

[lord groovy]

http://forum.gateworld.net/showthrea...1#post11099735

And here : http://9nin.deviantart.com/gallery/#Jaffa-Destroyer